Kurzweil ARTIS Spécifications télécharger pdf (Page 2)

Reading this guide with the Artis7

GS-2

GETTING STARTED GUIDE

Reading this guide with the Artis7

This Getting Started Guide is designed to cover both the Artis and Artis7 Stage Pianos. Both

instruments share common features and the term “Artis” is used to cover a description of

both instruments. Where there are differences, we use the name “Artis7” to help instruct

owners of that instrument.

Before You Start…

Don’t connect anything until you make sure the Artis is properly and safely situated. If your

Artis keyboard has been out in the cold, give it time to warm up to room temperature before

starting it, since condensation may have formed inside.

Setting up the Artis

1. Set the keyboard on a hard, at, level surface.

2. Four adhesive-backed rubber feet are provided with Artis. Carefully turn the keyboard

over onto a soft surface, remove the paper backing from the rubber feet and attach them.

NOTE : Unless the instrument will always be used with a keyboard stand,

attachment of the rubber feet is strongly advised. Otherwise protruding

screws will scratch the tabletop.

3. Connect the AC power cord to the Artis. Before plugging the cable into the power outlet,

check that the power is compatible with the Artis. The Artis runs on AC power and works

with voltages from 90-240 volts at 50–60 Hz (Artis7 is 100-240 volts at 50–60 Hz). The

voltage level is detected and set automatically by the Artis. If your power source does not

have the standard three hole outlet, you should take the time to install a proper grounding

system. This will reduce the risk of a shock. If your power outlet is not within these ranges

it is recommended you use an appropriate adaptor.

4. Plug the power cable into the wall.

1 2 3 4 5 6 7 ... 15 16

Pas de commentaire

Kurzweil ARTIS Spécifications Page 2