Kurzweil FORTE Spécifications télécharger pdf (Page 46)

Features of the Forte

3-8

Master EQ & Compressor

Master EQ

The Master EQ allows you to have realtime control over the frequency response of all audio

generated in either Program or Multi Modes. When the Master EQ On/Off button is “On”,

the rotary knobs can change the high, middle and low frequencies of the audio.

If the LED on the Master EQ On/Off button is lit, this indicates that the Master EQ

section is now “on”.

The HI and LOW EQ’s are shelving type lters, and the MID has an adjustable center

frequency with a range of approximately 2 octaves up and down centered around

approximately 1.4 kHz

Frequency Gain

~6.6 kHz -24dB to +15dB

MID*

~1.4 kHz -24dB to +15dB

LOW

98 Hz -24dB to +15dB

* center of range

Compressor

Use the Master Compressor to add compression to all audio generated in either Program

or Multi Modes. Press the Compressor On/Off switch to enable the master compressor.

If the LED on the Master Compressor On/Off button is lit, this indicates that the Master

Compressor is now “on”. Turn the Compressor knob to adjust the amount of compression

(left is minimum, right is maximum).

Generally, a compressor listens to an audio input signal and outputs a continuously volume

adjusted version of the input signal. A small amount of compression can help a sound to

blend with a band or other instruments by making the volume of each note more consistent.

Large amounts of compression act more like a special effect, reducing the attack volume of

notes, and increasing the decay, sustain and release volume of notes.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 251 252

Pas de commentaire

Kurzweil FORTE Spécifications Page 46